tunze group buy interest? Discounted prices.

[clamm]

Reefers,

I have been researching powerheads and have found the tunze's are what I need to produce the flow I want, after contacting a few online vendors I spoke w/one who is willing to do discounts on a moderate size order. Details are still unclear, I just need to get a feel for what the interest would be. As of now it looks like all sizes are available. To get an idea of what retail is and product specs check out the link below. We should expect to get a 10% or higher discount off of retail...thats what I know so far. The more we buy of course the better the price and shipping is minimal b/c its devided among all the orders.

http://www.marinedepot.com/aquarium_powerheads_pumps_tunze_turbelle_stream_ki t.asp?CartId=

These produce awesome flow, just look at the specs.

let me know if you are interested and I will try to set it up...
BRS SPONCERS AND LFS's ; feel free to jump in as well and state your prices.

ask questions on here so everyone can benefit rather then pm please.

Thanks,

Casey

[Greg Hiller]

I need a pair of the maximum size available (6100's?) and a controller to make 'em go.

[clamm]

ok, thats one...i few more....we may still get the discount with a few orders, i dont know yet... again sponcers can jump in if you have this stuff.

[clamm]

greg just some im hear ya and get the correct price you need 1 of item TZTS12 which includes 2 of the pumps and 1 controller. Correct?

[paulpp187]

i also need 2 6100 w/multicontroller let me know what prices we are talking before counting me in i can get the 2 6100 plus multicontroller for 700.00 if it would be less than that please contact me

[clamm]

paulp, check you prices...and click the link above cause 2 of them and the controller are below 400.00...and thats direct from marine depot, we should be able to get even cheaper and share shipping. let me know if your pricing was a typo, then check marine depot at the link about and make sure we are talking about the same type of fruit, from what you said you want the same as greg which is part number TZTS12
that pt # has 2 6100's and a 2 prt controller. the 700.00 one on their website is 4 6100's and a 4 prt controller. Which do you need?

Let me know,

Casey

[~Flighty~]

I think you might be reading the chart wrong, two and controller are 782.77. Prices are under the item, not above (unless the magnet holder is $1399.32 :) )

We're thinking about getting one of the cheeper ones maybe stay around $200 worth, but the controller looks tempting too.

[clamm]

OH, FLIGHTY'S RIGHT...782.77 is there price. WOW I DONT THINK THEY WOULD HAVE ENOUGH IF THEY WERE THE 300 PRICE FOR 2...WE CAN STILL GET SOME GOOD DEALS. SINCE THAT SEEMS TO BE THE MOST POPULAR VERSION ILL SEE WHAT THE PRICE WILL BE...FLIGHTY EVEN IF YOU DONT WANT THAT ONE THEY WILL STILL DISCOUNT YOURS AS WELL.

[Stanley Wong]

I needed two 6000 and a multicontroller-7094

[paulpp187]

http://www.marinedepot.com/md_viewItem.asp?idproduct=TZTS24

[clamm]

I needed two 6000 and a multicontroller-7094

STAN, SO YOU NEED

STAN MIGHT BE CHEAPER TO GET YOU A PACK THAT INCLUDES THAT CONTROLLER WITH AN EXTRA PUMP...BUT YOU ARE ONLY PLANNING ON CONTROLLING 1 OF THEM RIGHT, CAUSE THE 7094 IS A SINGLE INPUT CONTROLLER.

[clamm]

NEVER MIND I READ IT WRONG AGAIN, I KNOW WHAT YOU MEAN AND ARE LOOKING FOR...WILL GET YOU PRICE ASAP... SO FAR NOT COUNTING ME THERE IS INTEREST IN 3 SETS OF THAT KIT WITH THE 2 6100'S AND THE 2 PORT CONTROLLER.



STAN, SO YOU NEED

STAN MIGHT BE CHEAPER TO GET YOU A PACK THAT INCLUDES THAT CONTROLLER WITH AN EXTRA PUMP...BUT YOU ARE ONLY PLANNING ON CONTROLLING 1 OF THEM RIGHT, CAUSE THE 7094 IS A SINGLE INPUT CONTROLLER.

[marco67]

I'd Love to work with you guys/gals on this...
I'm new/ hungry and I'm sure I can make it work for everyone.
Let me know if I can help

[clamm]

Ok mark, when we finalize stuff we will make sure you get the prices to see what magic you can work over there.

[Richard]

If Marc is stepping up to the plate I'm in for 6000 and a controller(TS07).

[marco67]

Sounds good!
Thanks

[MickyB]

in for one 6100 without controller

[clamm]

we will let this run a few days then finalize everything i think...that way everyone has a chance.

[~Flighty~]

What would be a good size for a 120? we have 1200gph on the return and need more flow.

[paulpp187]

what is your dimensions on the 120

[SMS76]

"what is your dimensions on the 120"

I think it's 4x2x2

[paulpp187]

i would go with the 6000 it does like 1800 gph plus you can get the controller to turn it down. from what i also understand you can upgrade if its not enough by switching the impelar thingy i probally didn't spell that right ah well you can also contact tunze for there recomedations as well

[SMS76]

Question: How strong is the flow for Tunze Turbelle ? Stream 6060? Can i have sps frag 5-6" away from it? Will it be too strong for it? What's the safe distance after Tunze Turbelle ? Stream 6060 that i can have sps frags/colonies?

[paulpp187]

i wouldn't keep them that close contact tunze they give give you exact spot where you should put it

[wrassefan]

Question: How strong is the flow for Tunze Turbelle ? Stream 6060? Can i have sps frag 5-6" away from it? Will it be too strong for it? What's the safe distance after Tunze Turbelle ? Stream 6060 that i can have sps frags/colonies?

It would prob strip the flesh off the coral and kill it. Even tho it is a gentler flow, there is still 1600gph coming out of it. I run one and the closest sps (or any coral) in front of it is about 12". The polyps are usually closed most of the time on this piece also.

[NateHanson]

What would be a good size for a 120? we have 1200gph on the return and need more flow.

Cindy, just curious, is that 1200gph after you account for head loss and friction loss from the basement? or the unrestricted rating of your return pump?

[Brian]

I'm interested in 2 6100's and a controler

[~Flighty~]

That is the actual flow. We found it by counting how long it takes the tank to fill two inches (10 gallons) and then figuring out how many times per hour that would happen.

[DLCanuck]

Hi Guy's

Not to bust anybody bubble but I got mine few day?s ago at Sea Creature in North Providence for $711.99 before tax and the total with tax $761.83, that lot cheaper from http://www.marinedepot.com/md_viewItem.asp?idproduct=TZTS24. Please give him a call if you like to save more. Sorry if I bust anybody bubble, I figure I should let you guy?s know cause it lot of money we spent for are hobby. :o

[marco67]

Thanks Dan,
I'm sure I'll be able to take good care of this one!
and that does mean beating that price!

[Armando]

Depending on the price, i might be interested in a Tunze Multicontroller 7094 (http://www.marinedepot.com/md_viewItem.asp?idproduct=TZ2133)

[clamm]

Ok I have an initial price. Im not sure if its dependent on a min order yet or not, but lets see who is interested in this price and if Marc can beat it.

TS-24 Set (2 6100's and 1 2port controller)

700.00 shipped, no tax
----------------------------------------------------------------------------------

If I can get an idea from those that wanted this set please message me that you want it. So I can add you to the contact list for the final order.

Prices for other single parts to come.

[paulpp187]

i'm gonna skip i can get it right now for that and not have to worry about it so i'm out

[Greg Hiller]

Marco,

If you are following this thread I am still in for two of the largest streams available (is that the 6100?, these are for my 460 Gallon) and a controller that will make the two of them go. While I'm at it, and since I know you carry the XM bulbs, I could also use a 175W 10K XM mogul bulb, and a pair of 250 W 10 K XM mogul bulbs. If you can get the whole mess in before Xmas that would be great. I have some vacation (finally!) to take around Xmas and have been meaning to get down to your store.

[clamm]

i'm gonna skip i can get it right now for that and not have to worry about it so i'm out


k no prob

[denvig]

Depending on the price, i might be interested in a

TURBELLE STREAM KIT TS07 (6010)
http://www.marinedepot.com/md_viewItem.asp?idproduct=TZTS07

and night sensor

[Groove]

Depending on price I may pick up a 6000 or a 6100. I already have one and a multi-controller. I just forget which one I have...

How is the availability of the magnetic holders?

Unless you have a Eurobraced tank, you may want to order these as the mounting kits for these don't work well plastic topped tanks.

[clamm]

magnetc holders will have to check on.

[Stanley Wong]

I needed 2 6000 and a multi-controller.

[clamm]

Yup, 700.00 Shipped Stanley...you Ok W/that? If So Pm And Ill Add You To The Ones Who Have Confirmed Interest.

[~Flighty~]

What is a deadline on this? I'm still figuring out what to do. If anyone wants to help out here:
http://216.235.242.50/forums/showthread.php?t=4912
I could use some opinions.

[clamm]

I saw your thread flighty, im as new as you if not more so to saltwater so I dont want to tell you wrong. As of now we are shooting to order in 1-2wks...so there is still time... you can try putting a small amount of alk buffer or kalk and and watch is circulate to get an idea of where your dead areas are, but you probably already know that. Make sure you dont use much...other then that for flow, i have never got a good definition of what is needed. From the descripion of these that we are doing the buy for it looks like they really dont leave much dead stops, but are very powerful at the head. It looked like on could easily to a 75 gal. 120+ you probably should keep asking...does anyone own these? can you help us out...

[Groove]

I'm confused as to what I have.

I thought I remembered buying a 6000 as it was going in my 120 tank. I looked in my tank tonight and the casing for it reads 6100.10 (2500-12,000 liter/hour). That might explain the sand storm a little. :) I just found my sales slip and it reads Tunze 6000?

If anyone owns a 6000, can you look at the casing and tell me what it reads?

Thanks

[clamm]

i only see 6100 available.

[joefitz]

What about the fake rocks? Can you get a price on those? I'm considering two...

[dima96]

tunze 6000 and 6100 have the same head the little blue box is what is different between the 2 of the them.

[Brian]

What's the latest with this group buy, any news?

[clamm]

will have prices this week...hopefully tonight

[clamm]

finalized that is

[ScottM]

is marc on this? iam interested in a dual 6100 with controller. do they come with the optical sensor?

[clamm]

Hey marco, you wanna chime in here with your price...i think last I talked w/them that we were around 700shipped for dual 6100's w/controller...what can you do for us? Looks like there are about 7 or more of those sets plus some misc pumps and controllers people want.

[Groove]

is marc on this? iam interested in a dual 6100 with controller. do they come with the optical sensor?

Haven't seen you around in a while. The 120 you and Karl helped me drill in the center is doing great. I put a Tunze multi controller unit on it. The multi controller comes with the optical sensor. It's optional on the single controller.

[Brian]

bump

[clamm]

most suppliers are out and wont get these till Jan 05, even marco...so we can put off for a few wks.

[denvig]

They are always out of these. Thats why you have to order and wait for them to come in. If you wait untill after they are in they will be spoken for. Do we have any firm pricing yet?

[marco67]

I sent a message to casey about the lead time, wanted to be up front about it. If you guys want to get orders in I'll follow up with pricing ASAP so that we can be on top of the list.

[Syris]

Depending on pricing I am in for TURBELLE STREAM KIT TS07 (6010)
http://www.marinedepot.com/md_viewItem.asp?idProduct=TZTS07

[ScottM]

Marc/Casey,
Is there a price yet?

heres a quick list to sumarize whats in the thread.
hope it helps



Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6100 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders

[Armando]

I might be interested in a dual system, but only for January purchase. December reef budget is already blown :D

[PenMan]

Depending on the pricing I would be interested in the 6100 power head and a fake rock

[marco67]

I'm working on pricing this today, I will Post later and see how you like.

[Groove]

Correction:

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders

[Greg Hiller]

Correction...I don't really know what the TS-24 is. If it is a pair of 6200's (the largest ones I believe) and a controller to make them go, then that is what I am looking for.

[Armando]

Correction:

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders
you forgot to list mine

[denvig]

Also forgot the night sensor for the TS-07

[Groove]

Armando,
What size pumps do you want? The multi controller works with 6000's, 6100's, and 6200's.

Greg,
6200's are the largest and that TS-24 kit isn't what yuo want.

[marco67]

Sorry guys I'm ot forgetting this still waiting on a call back from Tunze. I will try calling again right now!

[Armando]

groove I am interested in a TS-24 kit. I also might be interested in a multicontroller 7094 for a pair of tunzes I already have.

[Yaktop]

Marc listed his intention by wanting to sponsor this group buy. He is a sponsor and is eligible to under the rules of the BRS Marketplace in this forum. IMO he has first refusal before anyone decides to utilize marine depot or other LFS's. In the event anyone wants to discuss or go any other route they should do so in the reef talk forum. my two cents.

I am not to sure posting prices is the way to go on this public forum. How to handle otherwise, conveinently I'm not sure at the moment.

[Armando]

BTW I don't want to sound harsh but I just want to buy a freaking pair of powerheads. Please let's not have this thread become another debate about sponsors & sponsorship plans. Thanks!

[marco67]

I guess seeing as I'm a sponsor I resemble that remark :p so..
Just for the record.
The only thing I'm interested in here is negotiating us the best possible price and the best possible ship date!

[clamm]

relax people, we asked marco to join this thread...

[paulpp187]

if it is not to late i have changed my mind i would like to get the ts -24 package.i thought this deal was gonna go down earlier but seeing how it has gone this long my funds are replenished and would like a set.thank god christmas shopping is done.

[Brian]

bump

[clamm]

its not to late, we are in a holding pattern because all the vendors' including my supplier and marc's are currently not shipping any untill the 1st of the year. I didn't ask why, but I think Marc knows... Marcs im going to post the prices as soon as they are available...and marc will do the same...

[Reef55]

I am interested in the two streams with a controller, but want to see prices first :)

[clamm]

2 6100's w/controller tentatively look like 700 and that includes shipping/taxes(if any) so thats the ballpark to have in mind...as the become available ...ill finalize the price i can get and marc will do the same and we will descide which we want to buy from...if its only a few bucks, id rather support Marc...and im sure others would as well...but if its several...Im afraid my pocketbook will...

Marc has been very good thus far so im sure if he can get us the same price or better he will.

Again, they aren't available to wholesalers/distributors until the 1st of the year. Marc is this going to be a newer design...do you know why they aren't shipping the last several wks of december.?

[marco67]

The reason is Tunze USA is out of stock. They are expecting another shipment after the first of the year. Everyone is back ordered because everyone needs to go through Tunze USA.

[clamm]

Ah, I see.

[Reef55]

What about price on 2 of the 6000 streams and a controller?

[clamm]

ill have to check i thought the 6000 were similar to the 6100's ill double check for ya.

[Reef55]

ill have to check i thought the 6000 were similar to the 6100's ill double check for ya.

The 6000's are similiar, just not as strong. 2 6100's in my 120 gallon plus the return would be way more flow than I want.

[weege1]

Looks like we are still waiting for prices and availability.... So depending on price I would like to get a TS07...

Also would like to see if the following will be available as well.

Tunze Photo Cell
Tunze Turbelle Magnet Holder

Thanks,
Louie

[delta]

6000 and the 6100 have the same body its the transformer that is different

nice part of that is if you buy the 6000 and its not enough you can purchase the transformer to make it a 6100 and in the end cost about the same if you just bought the 6100

Tunze kits will be on hold and prices are going up due to the release of the new aquacontroller. think the new controller is about 50 dollars more but offers more options

[Groove]

6000 and the 6100 have the same body its the transformer that is different

That clears up my question.
Thanks

[clamm]

Guys im going to try to clairify pricing this week. I have monday off, so should be able to get you price by then. Marc, why dont we go ahead and try to firm up pricing on your end as well...that way we will know were we are ordering then we can firm up all orders...and send confirmations (I will handle this) to those interested...we will then arrange collecting the money and placing the order.

Check back soon.

[clamm]

Marc...my guy is kindof hesitating...he said something like 700 even...I think + shipping of 10. But he has been flakey, and having so many people order...many I dont know...I think I would rather you run this group buy...If he can't get back to me, what is it going to be like after the order for service? Im glad you stepped up for us...so post your price and we will go with that. I don't think I want to trust this guy, i have got stuff from him in the past w/ no problem, but I have always been able to get ahold of him... So its all yours...what can ya do?

[marco67]

OK everyone,
I've heard from Tunze that stock is starting to come in. I'm working on getting quotes together for everyone, from the prices I see above I think we can do this at a pretty nice savings. Could you all help out please and edit this list as appropriate? I'm not looking for commitment yet but only interest on which I can base prices. Once quotes are posted we will need commitments before placing the order.
Thanks
Marc
c
Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders

[clamm]

thanks marc...

i will try to help get the list organized as well...

[Reef55]

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders

Mark - 2 6000 pumps and multicontroller

[~Flighty~]

~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
We are still very unsure about buying this, but we might break down and buy one.

[paulpp187]

o and don't forget me 1-ts-24 package (2-6100 and multicontroller)thanks paul

[clamm]

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Magnetic Holders

[Reef55]

Let's try this again since you missed my post 3 back clamm ;)

Mark - 6000 x 2 w/ multicontroller... same as Stanley Wong...

[denvig]

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Magnetic Holders


Denvig TS-07 with night sensor

[clamm]

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller

Magnetic Holders

[clamm]

guys check the threads! make sure we have you on the list if your are interested.

[marco67]

Thanks for putting that together, I'm working on a price sheet now.

[Armando]

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller
Armando TS-24

[clamm]

thanks armando.

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Denvig TS-07
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller
Armando TS-24
magnet holders?

[delta]

Greg 2- 6000 with multicontroller

[Greg Hiller]

I'll post the correction again (2nd time):

Correction...I don't really know what the TS-24 is. If it is a pair of 6200's (the largest ones I believe) and a controller to make them go, then that is what I am looking for.

[denvig]

I only need to be there once.

Greg hiller TS-24
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller
Armando TS-24
magnet holders?

[clamm]

Greg hiller pair of 6200's (the largest ones I believe) and a controller to make them go
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller
Armando TS-24
magnet holders?


Thanks greg, got you in this time.

[clamm]

Greg hiller pair of 6200's (the largest ones I believe) and a controller to make them go
stanley Wong 6000 x2 w/multi controller
Richard TS-07
Micky B 6100 Pump only
Brian TS-24
Groove 6000 Pump only
Syris Ts07
Scott Merrill TS-24
Joe Fitz 2 fake rocks?
Paulpp187 1-ts-24 package (2-6100 and multicontroller)
~Flighty~ Tunze Turbelle ? Stream Kit TS12 (6100)
Denvig TS-07 with night sensor
Mark - 6000 x 2 w/ multicontroller
Armando TS-24
Greg 2- 6000 with multicontroller
magnet holders?


Thanks greg, got you in this time.

[marco67]

Ok sorry about the wait, But in order to do this I'm wading through a 200 page catalog that?s been down loaded and translated into English.


Item# Description List price GB Price

TS-07 1 X 6000 W/ controler $295.00 $255.00
TS-12 1 X 6100 W/ controler $362.00 $314.00
TS-24 2 X 6100 W/ controler $782.00 $678.00
2 X 6000 W/ 7094 controler $646.00 $560.00
6000 pump 6000 pump only $240.00 $208.00
6100 pump 6100 pump only $308.00 $267.00
6000.25 stream rock $70.58 $61.00
6060 stream (not controlable) $127.03 $110.00
6080 stream (not controlable) $184.77 $160.00
7094.05 Photocell $13.95 $12.10
6080.5 Mag holder to 1/2" $33.33 $28.90
6200.5 Mag holder to 3/4" $47.82 $41.50
2X6200 w/ controler (will post Monday ~ 11:00 am)

All prices based on a minimum order of approximate quantities shown in previous posts, And will include shipping from Tunze to Fishy Business

P.S. if anyone can help me post an Excel doc please let me know It will make this much easier to read and easier to edit and repost as commitment firms up.

[delta]

TS-07+1 2 X 6000 W/ controler $535.00 $464.00


is this with the new multicontroller or the single controller that comes with TS-07?

[marco67]

Sorry that was the price of the TS-07 + another pump the 2 6000s with the 7094 multi controler would be $560 (I have made the correction above.)

[delta]

thx i m in!

edit
if possible it would be nice to get the new multi 7095
think the new price of 6000 x 2 plus 7095 would be around $594.00
if you could confirm my math that would great

[marco67]

I can do that first thing in the morning

[delta]

Thanks

[paulpp187]

o boy i can't wait

[clamm]

some great prices Marc!!!!!!! Whats a small single go for, I might be in...

TS-07 1 X 6000 W/ controler $295.00 $255.00

I am new to these as anyone, whats the the advantage of having a controller... and will 1 6000 be enough for a 75G tank?

[Scuba_Dave]

Advantage of a controller, has a food switch - temp off, night sensor - switches to low volume, can vary the speed from low to high or anywhere in between
gives you better control of flow & makes for better variety of flow

[clamm]

Thanks!



Advantage of a controller, has a food switch - temp off, night sensor - switches to low volume, can vary the speed from low to high or anywhere in between
gives you better control of flow & makes for better variety of flow

[Scuba_Dave]

I have the 6000 w/controller & night sensor. I also have just the smaller pump without any controller - but not in use
Very good prices

[Greg Hiller]

Marc,

I hope you can help me out. My order was left off, and I don't see the price on your listing. I need:


Greg hiller pair of 6200's (the largest ones I believe) and a controller to make them go

[~Flighty~]

from marc's post "2X6200 w/ controler (will post Monday ~ 11:00 am)"

[marco67]

Thanks Cindy,
Greg, I didn't forget ya bud. The 6200s are not on the std list I have but I will get an update as soon as they open today.

[Reef55]

I would like to know how much the 2 6000's plus a 7095 controller would be too :)

[JayG]

I too would like to know the price of two 6000's and the 7095 controller.

I?m still deciding if I?m going to go closed loop or Tunze on my new tank. I?m leaning towards Tunze at this point

[denvig]

I'm in sounds good

[denvig]

Deleted ;)

[~Flighty~]

7095
edit: nevermind ;)

[marco67]

Ok some new Info here.......
First of all the bad news is nobody can have the 7094 controls as they have been made obsolete. The good news is they have been replaced by the newer leaner meaner 7095 the even better news is:
Because it was my mistake. I'll eat the up charge.

I'd also like to offer an incentive/ goal
Get this GB up to $5K total sales and I will Issue a LiveStock coupon for 5% of each sale at the time of delivery.

Updated list
Item# Description List price FB Price
TS-07 1 X 6000 W/ 7091 controller $295.00 $255.00
TS-12 1 X 6100 W/ 7091 controller $362.00 $314.00
TS-24 2 X 6100 W/ 7095 controller $782.00 $678.00
TS-07 +1 2 X 6000 W/ 7095 controller $646.00 $560.00
6000 pump 6000 pump only $240.00 $208.00
6100 pump 6100 pump only $308.00 $267.00
6000.25 stream rock $70.58 $61.00
6060 stream (not controllable) $127.03 $110.00
6080 stream (not controllable) $184.77 $160.00
7094.05 Photocell $13.95 $12.10
6080.5 Mag holder to 1/2" $33.33 $28.90
6200.5 Mag holder to 3/4" $47.82 $41.50
6200 pump 6200 pump only $418.00 $362.00
7095 control new 7095 controler $202.47 $175.55
6212 wave box Wave Box $466.99 $405.00
Greg Hiller Kit 2X 6200 w/ 7095 controller $1,038.00 $899.00



If anyoneneeds the link to Tunze USA here it is
http://www.tunze.com/usa/index.html?lang=en-gb

[JayG]

After the correct I'll let you know soon.

[marco67]

Sorry that was the price of the TS-07 + another pump the 2 6000s with the 7094 multi controler would be $560 (I have made the correction above.)


once again sorry !

I can however offer the 7095 controller on this at no extra charge

[Reef55]

I just got a big "we don't need that now" :( Really sorry I won't be able to get in on this one (Mark - 2 6000's and controller)

[paulpp187]

wow if all the people on the list so far go threw with it thats almost 8,000.00 if my numbers are correct WOW

[delta]

TS-07 +1 2 X 6000 W/ 7095 controller $646.00 $560.00
very nice i am happy with that :)

[delta]

I?m still deciding if I?m going to go closed loop or Tunze on my new tank. I?m leaning towards Tunze at this point

just remember the electrical bill tunze will save you money in that area it almost pays for itself

atleast thats what i told my wife ;)

[dima96]

i'll take one each
6000 pump 6000 pump only $240.00 $208.00
6200.5 Mag holder to 3/4" $47.82 $41.50

[~Flighty~]

Ok, I got a grudging, "if you think we need it" Thats good enough for me :)

I'll take :
TS-07 +1 2 X 6000 W/ 7095 controller $560.00
Do we pay in advance of the order?

[marco67]

I'll start a list, we need to come up with a dead line for ordering/ payment then a drop deadline / order date.
> "Do we pay in advance of the order?"
Yes I get to, so it's only fair that you guys share in the fun ;)

[clamm]

what size do you recommend for a 75g

[denvig]

Some info

Tunze Multicontroller 7095 Pump Controller
BRAND NEW!! 7095 multicontroller controls upto 4 6000/6100/6200 stream pumps, expandable to 8 pumps via branch adapter.
Offers:
- wave simulation
- tidal current control
- night mode operation including photo-cell
- random flow
- food timer
- waterproof membrane keypad on new housing
- LED moonlight with 29 day moon phase including universal mount
- 2 interval functions for tidal currentcontrol
- displays capacity of connecteed pumps


Also check this out

http://www.tunze.com/Interzoo-Neuheiten-2004/Flyer%202004/Flyer_2004_E_EUR.pdf

[~Flighty~]

Here is a pic of the 7095

[delta]

in 75g a 6000 would do you nice with controller

think we need a head count

i m in with the TS-07 +1 2 X 6000 W/ 7095 controller $646.00 $560.00

[Groove]

Long drive for me. I hope you will allow us to give CC info over phone and pick up in person. Please let me know.

[clamm]

Im in for

TS-07 1 X 6000 W/ controler $295.00 $255.00

and a magnet holder for 1/2"

[paulpp187]

count me in definately ts-24.does it come with the night photo cell if not put me down for one of those also i'll have the $$$ on thur so i can pay then.2 hr ride for me. i also hope cc over the phone would be ok.

[Brian]

Count me in for the TS-24 (2X6100 W/Multi controler) also would like two of those magnets but I'm not sure which one I'd need for my 220g, any thoughts? I'm gonna have to join the group of people 2+ hrs drive from you too, hope calling up with a cc # works by you...

[Greg Hiller]

Marc,

I'm in for sure. I'll call you with CC info.

[Owen22]

Is there a Drop/Add and payment deadline date set up?
Or is this going to take place at the next meeting?

[clamm]

marc, im pretty sure im in...have to clear it w/the wife, but if a tunze is enough , i may eliminate my closed loop with it. Ill let you know shortly, how are we paying and how is shipping going to be done.

[clamm]

was there a website that tells you where to place it?

[delta]

ts-24.does it come with the night photo cell

photocell comes with the mutlicontroller 7095 so any set up that has a multicontroller will come with the photo cell

was there a website that tells you where to place it

depends on your setup so best leave post here best way tp get you answer
http://reefcentral.com/forums/forumdisplay.php?s=&forumid=92

edit: seems he recomends one 6000 w/contrller placed in the back corner aimed towards front center for standard 75 gal HTH

[~Flighty~]

Thanks for that link to the tunze rc forum. Iwas just guessing about what I needed for my setup, but he recomends exactly what we're getting, so I feel good. He says two 6000s with the 7095 controler for a 120. Looks like that is his setup too.

[clamm]

marc after all my tank is going through I don't think I can get my wife to let me buy one. She want me to either "fix it or get rid of it" Part of that is restocking...take me off the list for now...I will pay full price if/when I am ready for it. Right now she is being really hard on me cause of the money we have put into it and have little results.... I really need to hit the lottery.

Thanks marc.

[Armando]

I'm thinking about ordering:

TS-07 +1 2 X 6000 W/ 7095 controller $646.00 $560.00

(2 X) 6080.5 Mag holder to 1/2" $33.33 $28.90 (57.80)

[marco67]

I hope you will allow us to give CC info over phone and pick up in person

"Deadline" ?
I'm flexible.... One line of thought says give it a week or so for everyone to decide another is ASAP as I'm sure people are anxious, Lets decide and set this by the end of the day today.......any thoughts?

Cindy, Delta and others
Thanks for fielding some of those questions yesterday. I was on the road all day and I'm just catching up now.

[~Flighty~]

It sounds like the factory is backordered quite a bit. Any idea how long we will have to wait for these things? Not that I'm getting impatient already or anything :P

[marco67]

Tunze (Europe) shuts down for the holidays so basically nothing ships in December. Right now it's not so much a back order issue as a "get it in and get it out" At Tunze USA issue. I'm speaking with Roger (owner of Tunze USA) a couple of times a week now. He assures me that although not all products are in stock he has product coming in almost every day. He will ship everything he can as soon as the order goes in and the rest ASAP.
I think the trick here is to get the order in ASAP.

[denvig]

I'm now thinking that one 6000 with the new 7095 multi controler (with moon light etc) would be a good start. (Then I can add a second 6000 at a later date) if needed.

[Aquadiva]

I'm now thinking that one 6000 with the new 7095 multi controler (with moon light etc) would be a good start. (Then I can add a second 6000 at a later date) if needed.

I was thinking exactly the same thing....Hubby bought off on this, but only if I went that route. He wants to get a bigger tank in the not so distant future and doesn't want to have to upgrade a controller then. Right now we have a 75 so the 6000 would be good.

Is there a price for this, or would it be a la carte pricing: the 6000 + the 7095 controller + the cost of the magnet holder thing. (would I need a 1/2 inch for that?)

Also, is this going to be a Cape pick-up? 4 hour drive :eek: Gonna have to block in some time for this.

Thanks
Linda

[marco67]

Is there a price for this, or would it be a la carte pricing: the 6000 + the 7095 controller + the cost of the magnet holder thing. (would I need a 1/2 inch for that?)

Yes that?s how it works, even the "kits" are only that in name for ordering convenience not packaging and pricing.

Also, is this going to be a Cape pick-up? 4 hour drive Gonna have to block in some time for this.

As much as I'd like to have you all to come down, I do realize that it a haul for some. I will be flexible on the pick up. Maybe I'll finally take a Saturday off and attend a meeting?

[~Flighty~]

Maybe we could arrange a roadtrip for some of the NH folks. I know I've talked to a few NH people (not nessescarily on this buy) who want to get some dry rock too. I want to get down to the store, but with a newborn, thats lots of stops for feeding and diaper changes.

[marco67]

thats lots of stops for feeding and diaper changes.

:eek: Yikes Newborns and road trips are like reefs and copper :D

[Denise Goodheart]

Is the magnet required to hold the tunze in place if you also use a rock to hide it???? Is the magnet the only way to hold the stream....??
Denise

[NateHanson]

Newborns are great for roadtrips!! They sleep all the time! We travelled more in the four weeks after Lily was born than we have in any subsequent month.

[marco67]

The Magnet is not needed with the rock. The standard mounting is with a bracket that hangs from the tank rim, extentions are available if you want to go deeper than the supplied ~4". The magnet gives you the advantage of being able to put the pump at any depth and at any angle. The rock offers a way to hide it and/or position it away from the glass.