ggomez
05-28-2004, 06:22 PM
Oceanic 30g cube black trim (2-1" holes drilled in the back corners)
Black Oceanic stand with tinted black glass doors
Black Custom Canopy with easy access door (I build it myself)
(The stand has 1 shelve to hold MH ballast & timers etc. inside the stand)
Custom build 1/4 inch Acrylic sump/refugium, I made this to fit perfectly inside the stand and you won't have to worry about water overflow & bubbles
HOB Skimmer very similar to bakpak (canadian acrylic shop made this)
PFO 175 watt MH Ballast
PFO Optimal Reflector w/mogule socket
small WorkHorse PC ballast
32 watt True Actinic bulb (enough actnitic for the whole tank)
2 big smart fans for the Canopy
MAG5 inside sump
1 floating cleaning magnet
1 heater
1 floating glass thermometer
1 cheap salinity tester
1 battery operated air pump
plumbing included (3/4 true union clear pvc swing check valve & 2 ball valves)
The inside of the canopy is lined with Plumbers reflective tape to protect the wood from heat and the tape also reflects light back into the tank.
Reflector & socket & actnitic pc bulb are very nicely mounted inside canopy
Both fans are not mounted inside canopy because I removed them, but I can mount them back for you.
1" live Pink Samoa sand
I will keep my nice Belkin power-strip that fits nicely inside the stand.
I will also keep my 10K Ushio bulb which is about 6 months old.
I will also keep the live rock & corals & fish.
The tank is currently up and running and has been running for about 5 months or less. I will keep it up and running until I sell it. If I don't sell it I will set it up as a sea-horse tank.
Here are some pics, as you can tell in the pics, the tank has a little corner splinter on the back corner, it is not noticable and it will not leak unless you hit it with a big hammer, it is Oceanic thick glass
http://www.lachusma.com/reef/30gcube/30gcube.html
(I will replace some pics with other ones tonight or tomorrow morning)
You are welcomed to stop by whenever you want to look at it,
I am in no rush to sell it, I am not leaving the hobby I am just setting up a 40g breeder that will be my new sweetheart. I live a couple of blocks away from JFK UMASS T-Stop.
All equipment is newer than 7 months,.
Thanks,
Gilbert Gomez
Black Oceanic stand with tinted black glass doors
Black Custom Canopy with easy access door (I build it myself)
(The stand has 1 shelve to hold MH ballast & timers etc. inside the stand)
Custom build 1/4 inch Acrylic sump/refugium, I made this to fit perfectly inside the stand and you won't have to worry about water overflow & bubbles
HOB Skimmer very similar to bakpak (canadian acrylic shop made this)
PFO 175 watt MH Ballast
PFO Optimal Reflector w/mogule socket
small WorkHorse PC ballast
32 watt True Actinic bulb (enough actnitic for the whole tank)
2 big smart fans for the Canopy
MAG5 inside sump
1 floating cleaning magnet
1 heater
1 floating glass thermometer
1 cheap salinity tester
1 battery operated air pump
plumbing included (3/4 true union clear pvc swing check valve & 2 ball valves)
The inside of the canopy is lined with Plumbers reflective tape to protect the wood from heat and the tape also reflects light back into the tank.
Reflector & socket & actnitic pc bulb are very nicely mounted inside canopy
Both fans are not mounted inside canopy because I removed them, but I can mount them back for you.
1" live Pink Samoa sand
I will keep my nice Belkin power-strip that fits nicely inside the stand.
I will also keep my 10K Ushio bulb which is about 6 months old.
I will also keep the live rock & corals & fish.
The tank is currently up and running and has been running for about 5 months or less. I will keep it up and running until I sell it. If I don't sell it I will set it up as a sea-horse tank.
Here are some pics, as you can tell in the pics, the tank has a little corner splinter on the back corner, it is not noticable and it will not leak unless you hit it with a big hammer, it is Oceanic thick glass
http://www.lachusma.com/reef/30gcube/30gcube.html
(I will replace some pics with other ones tonight or tomorrow morning)
You are welcomed to stop by whenever you want to look at it,
I am in no rush to sell it, I am not leaving the hobby I am just setting up a 40g breeder that will be my new sweetheart. I live a couple of blocks away from JFK UMASS T-Stop.
All equipment is newer than 7 months,.
Thanks,
Gilbert Gomez