• ******* To read about the changes to the marketplace click here

Add T5s to Reefbreeders

chief fan

Member
BRS Member
Adding T5s to a 48inch Reefbreeders V2+. Currently plan to add two ATI Blue Plus. Also am considering adding another pair of T5s.
Fixture will be mounted 15 inches above a standard 120.
Two questions:
What would you guys recommend for the two T5s in addition to the two Blue Plus?
What settings would you recommend for the Reefbreeders light for SPS?
 
I'm running 48" rb v2 with 2 tru actinic and 2 blue +
 
I have an extra set of tru actinic if you want to buy them from me. Lmk or trade for 2 blue +
 
Reef breeders are maxed out at 8% whites 24% blue, rb, uv. Red and green are about 4% max. 8 hours 12 hours total on reef breeder ramping for 2 hours before and after. T5s are on for 8 hours.
 
Adding T5s to a 48inch Reefbreeders V2+. Currently plan to add two ATI Blue Plus. Also am considering adding another pair of T5s.
Fixture will be mounted 15 inches above a standard 120.
Two questions:
What would you guys recommend for the two T5s in addition to the two Blue Plus?
What settings would you recommend for the Reefbreeders light for SPS?
I run 3 ATI blue plus and 1 coral plus with my photon V2+ I have been successful with this combination
969BF3F3-AA80-4739-9F1E-1EFFD06101A5.jpeg
 
I might steal your reef breeders file and try it out. I'm getting the green effect when most of my sps turn green and lose the reds and purples and blues.
 
@sutton6989 program is pretty close to AB plus program based on discussions with Logan. This image is just now with no filters. good luck! Happy Reefing
image.jpg
 
Back
Top