Zirky Well-Known Member BRS Member Sep 2, 2020 #1 My apex temp is stuck at 121f and won’t calibrate. Do I need a new probe?
goggs99 Well-Known Member BRS Member Sep 2, 2020 #2 I would imagine so if it won't calibrate. Try unplugging it
OP OP Zirky Well-Known Member BRS Member Sep 2, 2020 #3 Tried unplugging. No luck. Thanks for the suggestion.
Cpage101 Current BRS Vice President Moderator Officer BRS Member Sep 4, 2020 #4 first check your aquabus connection if it comes from a PM1 and if not make sure it is plugged in. if all is good I would try replacing
first check your aquabus connection if it comes from a PM1 and if not make sure it is plugged in. if all is good I would try replacing
