dz6t Acro Garden BRS Sponsor BRS Member Nov 15, 2005 #1 I am trying to hang two Aqua Medic Aqua Spacelight mini pendant 250w HOI. These are the one with ballast build in. Very heavy. The hanging kits looks the same as those for Ocean light pendant (separate ballast). Are these hanging kits save to use?
I am trying to hang two Aqua Medic Aqua Spacelight mini pendant 250w HOI. These are the one with ballast build in. Very heavy. The hanging kits looks the same as those for Ocean light pendant (separate ballast). Are these hanging kits save to use?
scavdog Well-Known Member Staff member Moderator Officer BRS Member Nov 15, 2005 #2 They should be safe. I used that setup on my dual 250 spacelight for over 3 yrs. Same cabling setup 2x as heavy.
They should be safe. I used that setup on my dual 250 spacelight for over 3 yrs. Same cabling setup 2x as heavy.
OP OP dz6t Acro Garden BRS Sponsor BRS Member Nov 15, 2005 #3 how about the ceiling attachments? Are the two screws into ceiling strong enough to hold the light? Thanks
how about the ceiling attachments? Are the two screws into ceiling strong enough to hold the light? Thanks
scavdog Well-Known Member Staff member Moderator Officer BRS Member Nov 15, 2005 #4 make sure you anchor it to a joist
clamm Nothing to nobody Nov 15, 2005 #6 agree with scavdog. Weren't you anti MH anyway...guess I haven't followed your progress is this the lighting for your 90G?
agree with scavdog. Weren't you anti MH anyway...guess I haven't followed your progress is this the lighting for your 90G?
ScottM Non-member Nov 15, 2005 #7 the cable kit will hold the light just fine. make sure you screw into a stud or use an expanding anchor. if your just going into sheetrock, be careful, they can pull right out.
the cable kit will hold the light just fine. make sure you screw into a stud or use an expanding anchor. if your just going into sheetrock, be careful, they can pull right out.
R ReeferMedic Well-Known Member BRS Member Nov 15, 2005 #8 http://www.homedepot.com/prel80/HDU...earchResults.jsp&MID=9876&N=2984+4078&pos=n23 Click on "bolts, nuts, & washers", on the menu on the left. The crown bolts work well if there is no joist to anchor to........ Last edited: Nov 15, 2005
http://www.homedepot.com/prel80/HDU...earchResults.jsp&MID=9876&N=2984+4078&pos=n23 Click on "bolts, nuts, & washers", on the menu on the left. The crown bolts work well if there is no joist to anchor to........