-
******* To read about the changes to the marketplace click here
urgent!! anyone want to help me setup ro/di bought it used no instructions
- Thread starter jason401
- Start date
Man I am headed far away from Boston as I type this.
Go to the web. It is really not hard at all. You just need a water source and drain for the waste water. Red hoses are the bad water in and blue is the good water coming out.
Someone may reply, but I doubt tonight as it is late.
Good luck and let us know how you make out.
The hardest part is... Location, location! Source, disposal and access.
Go to the web. It is really not hard at all. You just need a water source and drain for the waste water. Red hoses are the bad water in and blue is the good water coming out.
Someone may reply, but I doubt tonight as it is late.
Good luck and let us know how you make out.
The hardest part is... Location, location! Source, disposal and access.
What brand / model do you have? How many clear round canisters? Can you post a pic of the unit? You should be able to find a manual online, even if it's not the exact unit you have they all work pretty much the same.
The short of it is you will have;
-a line for tap water in
-a line for waste water out
-a line for product water out.
Depending on the unit, you may also have one or two bypass/flush valves and lines, a pressure gauge, auto shut off unit, and or inline TDS meter. (a pic will tell a thousand words here)
The short of it is you will have;
-a line for tap water in
-a line for waste water out
-a line for product water out.
Depending on the unit, you may also have one or two bypass/flush valves and lines, a pressure gauge, auto shut off unit, and or inline TDS meter. (a pic will tell a thousand words here)
Similar threads
