• ******* To read about the changes to the marketplace click here

Why? SPS acclimation

Aloha all, B I also was wondering what you use for Mag? I really want to use Randy's Mag Mix but time is not my friend right now. If your readings are accurate ( which I'm sure they are) that is a huge amount of PO4 but mine always read zero. Maybe it's because I can't keep my mag up? Well great thread anyway and Mahalo for all the help. Eric
 
If Brian doesn't mind me replying he uses a salt mix which doesn't require him to supplement MG, Tropic marin.........
 
You'd better stop using your salt mix then! ;) I bet if you took a concentrated amount and tested it the same way that you would get a phosphate reading. 600-800 ppm in something that concentrated is nothing. When you add that to your tank you are probably bumping the phosphates up in the parts per billion.
Oh maybe I'll switch to IO then!!! Not
You can't get the phosphate reading from a kit that these mag sups contain....They are loaded with inorganic phosphates...That form of phosphate isn't detectable to the reef test kits on the market....

I've done extensive research as well as spent loads & loads of money in this area... From high end test kits to having things tested in special brine labs from experts in this area...

So if you think your dilution method works....Use it..Wise cracks about salt.....There not needed, Dude..

Steve, Please do me as well as Eric a favor here......Leave your opinions on your own thread under the subject you continue to discuss here.

This matter doesn't even pertain to the original thread question from the originator This has gotten way off from the original subject the originator was looking answers for...

Sorry, Eric.. for the hijack....
 
Aloha all, B I also was wondering what you use for Mag? I really want to use Randy's Mag Mix but time is not my friend right now. If your readings are accurate ( which I'm sure they are) that is a huge amount of PO4 but mine always read zero. Maybe it's because I can't keep my mag up? Well great thread anyway and Mahalo for all the help. Eric


I use a small amount of dolemite in my ca reactor to suppliment Mag.....IMO & also IME it has not had any long term effects in my system. (I also use TM salt which is higher in mag levels to start...so between the two I'm close to where I want to be... I'm sure people will chime in & say how dolemite is bad becuase it has traces of arsenic. etc.....I'm using very little & the traces that are there are much lower than the IO phosphates. (in the PPB to start)

HTH answer your question, Eric

If you want you can PM me & I will let you know the formula...
B
 
Last edited:
So if you think your dilution method works....Use it..Wise cracks about salt.....There not needed, Dude..

I'm sorry...I thought you had a sense of humor :rolleyes:

Steve, Please do me as well as Eric a favor here......Leave your opinions on your own thread under the subject you continue to discuss here.

If I'm not mistaken, you and chew started with the opinions and I was just arguing your opinions with my own. From now on, I'll just remember that you both are better than me and leave it at that. FWIW, Randy Holmes Farley has always said that the levels of phosphates in his mixure (the one with Epsom Salts in it) is nothing to worry about. I'll believe him over you two any day of the week.

This matter doesn't even pertain to the original thread question from the originator This has gotten way off from the original subject the originator was looking answers for...

Sorry, Eric.. for the hijack....

Actually it does...You guys brought it up and I was trying to give a different opinion on it. The difference is I don't speak about it like I'm an expert. I have no doubt you are an experienced reef keeper, but sometimes I feel like you think you are above everyone else here. The thing that made me chime in is that there are people here (like "chew") that follow every piece of advice from you and other experienced people like it is the only way to go. You have your reasons to do things your way, but the fact is people have been using Mg supplements for years with no adverse affects.
 
I'm sorry...I thought you had a sense of humor :rolleyes:
Actually I do
FWIW, Randy Holmes Farley has always said that the levels of phosphates in his mixure (the one with Epsom Salts in it) is nothing to worry about. I'll believe him over you two any day of the week.
:p


Actually it does...You guys brought it up and I was trying to give a different opinion on it. The difference is I don't speak about it like I'm an expert. I have no doubt you are an experienced reef keeper, but sometimes I feel like you think you are above everyone else here. The thing that made me chime in is that there are people here (like "chew") that follow every piece of advice from you and other experienced people like it is the only way to go. You have your reasons to do things your way, but the fact is people have been using Mg supplements for years with no adverse affects.
Ok so I mentioned it.....I didn't mention it for it to become a page & a half discussion....
In closing I may add:

You know the problem here? Unfortunatly....You are one who feels or gets a sense that I think I know it all. (your not the only one either)


Pretty Sad I may say......

People who feel that way just don't know me...
There is more than one way to skin a cat & I never (may I say NEVER) tell anyone or want anyone to think my way is the only way.
As I've said in the past.....proof is in the pudding.....If your running a softie lps tank you don't have to worry much about phopsphate levels as much as you Do in an SPS system....Add a mixed reef & that is an even different animal. It becomes more critical...
So it does make a difference where advise lies & it is compliled from.

Listen to who you want.....I really don't care & enjoy your softies

BTW...I have a sense of humor but when someone attacks me openly I don't usually back down. (That is why I get time outs)

Steve, In the future it would be nice if you weren't so hostile.
I don't think I deserve it...
 
I never did attack you. I was questioning what you were saying (I think there is a very big difference). What do you mean "your softies"? Do you not remember that I had a very successful mixed reef with very large acro colonies that started out from small frags? Only one colony in that tank was purchased as a colony. Don't try and downplay my experience in the hobby...I didn't even come close to doing that to you.
 
Last edited:
BTW...I ran that mixed reef for over 2 years with only one RTN incident due to an Alk issue with my reactor and never had a crash so I must be doing something right. I've been running my new tank (which is more of a mixed reef than softie since I have more LPS than anything in there) for only a couple of months.
 
Good discussion, glad to see the advanced forum getting some use. :)

A few comments:

>Problem with all mag suppliments out there. (no matter which one you use or prefer due to cost or whatever) They have high levels of phosphates....<

I was not aware of this. It would be worthwhile to know how you did your testing. Testing a pure solution of concentrated magnesium chloride with a standard test kit (even the Hanna meter) might give you a false reading due to the test kit not being designed for testing a high concentration solution (not saying you did this, I'd just be very careful with testing like this).

A good way to test for something like this (I think) would be to add enough of the magnesium supplement to an aliquot of water from your tank to increase the magnesium by 200 ppm or so. Then see what the Hanna meter gives you for a change in PO4 levels. I'd say if it was less than a 0.02 ppm increase, it would not be a big deal. The Hanna meter should be able to test for this level of increase. In the initial testing of the Liam's meter that I did before the club purchased the meter it was sufficiently sensitive in this range.

>The other problem....
If you try to add too much & your water is already quite saturated you will end up with percipitation...(the sandbed will then be saturated with the suppliment & will add levels of phospahtes to toxic concentrated levels) <

Actually, if you are talking about magnesium I don't think that precipitation is likely to occur in the ranges that we are talking about (a 100-400 ppm increase in magnesium). I bumped magnesium up to around 1500 once with no apparent issues in an isolated tank. Magnesium carbonate (unlike calcium) is not supersaturated in seawater. If in fact a lot of phosphate comes in at the same time, I'd agree that the phosphate would be a big problem just to the coral health. But phosphate actually 'poisons' the growing crystal (stopping it's growth) when calcium carbonate is attempting to precipitate in seawater. This is why high phosphate is bad for corals.

In talking about calcium preciptation events linked to an addition of a seed crystal for precipitation to start on Randy has this to say about the interaction of magnesium and calcium (from http://www.advancedaquarist.com/issues/mar2002/chem.htm):

What processes inhibit continued precipitation of CaCO3 onto a growing crystal? The main thing happening in normal seawater is likely the impact of magnesium. It does two critical things:

1. Magnesium holds onto carbonate ions and reduces their free concentration, thereby reducing the likelihood of precipitation onto calcium carbonate surfaces.

2. Magnesium gets onto the growing surface of the crystal, essentially poisoning it for further precipitation of calcium carbonate.

Note that while both of these processes inhibit precipitation of calcium carbonate, the first actually increases the solubility, whereas the second does not. It is worth noting that the solubility of calcium carbonate in seawater is about 26 times higher than in freshwater at the same temperature, and this first effect of magnesium is one of the reasons.


>It can also harden the sandbed causing a biological bacteria die off from suffocation. (the top level of the sand will harden from the excess suppliment)

BTW...this can happen with Ca suppliments as well!!!!<

I think that it would only happen with calcium supplements. And only if alk and calcium are high, and also if pH is high at the same time. This is usually only a problem with newly set up tanks with a lot of new, clean fresh sand. Once the sand gets a bit of a natural layer of proteinaceous 'stuff' on it's surface, calcium carbonate is much less likely to precipitate out on it.

>You can't get the phosphate reading from a kit that these mag sups contain....They are loaded with inorganic phosphates...That form of phosphate isn't detectable to the reef test kits on the market....<

While I believe that the form of phosphate that is likely to be in these supplements is in fact inorganic, I believe that it is in fact organic phosphate that cannot be easily tested for.

Some more from an older article by Randy (http://www.aquariumfish.com/aquariumfish/detail.aspx?aid=2276):

A second point about organic phosphates is that they will mostly not be impacted by phosphate-binding materials sold to the aquarium hobby. Consequently, while these may do a fine job of reducing inorganic phosphate, they won’t help an algae problem that is caused by organic phosphates.

A final point is that organic phosphates will not be detected by any hobby kit unless it is specifically designed to detect them (most do not). Those that do (e.g., Hach PO-24) break the phosphate off of the organic and thereby convert it into inorganic phosphate prior to testing.


FWIW, I went back and looked at the elemental analysis of the Dead Sea Works magnesium chloride that we purchased several years back (most sources of magnesium chloride would be similar, don't know how magnesium sulfate would compare, but it's best to use a mix of the two, fwiw):

Element Typical(ppm) Maximum(ppm)

Mg 115000(11.5%) 125000 (12.5%)
Ca 7000 8000
Br 5000 8000
K 2500 3500
S(SO42-) 180 200
Sr 120 150
B 20 30
Li 10 15
N* 4 5
Si 9 15
Fe 3 10
P 2 3

I believe this analysis was performed by ICP. It lists P (phosphorus) as a maximum of 3 ppm (typical of 2 ppm), compared with 115,000 ppm for magnesium. An ICP analysis would burn up and convert any phosphate molecules to phosphorus atoms I believe. Using this analysis with the 'typical' value for P, an addition of sufficient MgCl2.6H20 to increase the Mg level in your tank by 200 ppm would increase your phosphorus levels in your tank by 0.0035 ppm, or 0.0107 ppm phosphate. So, looking back at all this now, if you dosed enough MgCl2.6h20 to increase the Mg by about 400 ppm, you'd probably Just barely be able to detect the difference using the Hanna meter (0.02 ppm increase).
 
I'm glad you think this discussion has been good!!!:confused:
Even though I was not going to.......I have to respond here.....


Greg, There are so many areas I could discuss with you openly on this subject which will become contradicting to your above statements (as you've done when you replied to a large portion of my quotes)
I will refrain from doing so......

If I do, it will turn into something most people won't bother to even read ...Which is the whole reason we post in the first place....It kills me though when I see posts with chemical analysis.....
Those are done on one batch or a small lot...

I have many things I disagree with.....Problem is: It isn't worth it to me at this point to waste any more time with this matter.
Let me put it as nice as I can here.... (& I'm not trying to sound arrogant people.)
I don't agree with some methods you believe in when it comes to reefing.
(as well as others mentioned above but I usually keep them to myself)

& I'm sure other do this as well!!! (not with any one person in particular)

I'm also aware by some statements above that you don't agree with some of my methods as well.
I'm fine with that..
I've tried things in this hobby ....Tested , compaired & tested again & again. I've compiled what works & doesn't work for me.....(this is from 8 plus years of reefing)
I've never written articles for online magazines which has fueled my exposure in the hobby (& got paid to do so)

I'm not a chemist & never claimed to be......


But I know what it takes for me to be succesful in this hobby longterm....
So if all I've done is teach myself...so be it


Sorry if this sounds like I'm coming off the wrong way.....
My passion in this hobby can be perceived as something else.....

BTW.....I hope I haven't struck a nerve...Not trying to in any way....;)

B
 
Brian,

I'm not debating your methods so much as I am some of your statements regarding the reasoning. For instance, I agree that getting worked up over magnesium is not super important, meaning if you have it above 1200 ppm, you are probably fine. However, Not adding it to a tank to boost it back up into that range because one is worried about phosphate being added at the same time I think is not a good thing for people to come away with after reading this thread.

I have no doubt that you are quite successful, but everyone's tank is different, and I hope that people reading threads like this will be able to learn from what they've read, and apply it to their tank. That's difficult if the person reading doesn't come away with a more fundamental understanding of what is happening and why.

You mention the question about chemical analysis. For the analysis that I posted you will see that there are two values, one is the typical level, and one the maximum level. For most chemical manufacturers, these tests are performed on every lot, and the numbers they report are based on what they've seen over the course of the history of the manufactur of the product. I often find it valuble to look at this type of data because it allows me to do a few quick calculations to determine how important a factor is. It's very easy to say (and accurate and I'll be the first to agree) that all, or nearly all magnesium supplements have phosphate in them, the more important question is (as I see it), are the levels that would end up being added to a tank for an occasional adjustment to magnesium levels be likely to cause a problem? The same goes for anything I add to my tank.
 
Greg, I agree with the comment on leaving someone with less experience or
( a newbie with the wrong impression that is)

I'm usually pretty clear on that though....If you read back on this thread you will see that it was mentioned that TM salt (the one I use.... has a higher level of mag & also I use dolemite in my CA reactor to add depleted mag)

You may have missed it...but when a thread becomes more than a page it can get skimmed by!!!;)

B
 
I'm not sure if I would fully trust that "icp" analysis.. the company itself states there can be high ammonia levels, and our batch grew lots of funky scum in the bucket even after a few days.. so there was definitely some serious bacteria food in it. I'll never use it again.
 
Jeremy,

Caution is certainly in order for anything like this. I myself pretty much only use the Magnesium chloride that we got in the group buy years ago. That, I tested for ammonia myself and it was nearly undectable. Of course there are plenty of other things I could not, or did not test for....so....user beware. For anyone using batches of the MAG flake purchased at a hardware store, I suggest you a least test for ammonia using a hobbyist test kit.
 
Back
Top