• ******* To read about the changes to the marketplace click here

Help getting my reef octopus 150int working

JTM4UG

REEFER
Ive tried it at every water depth from 9” to 6”. Seems to overflow the collection cup on the lowest setting regardless. Any tips to getting this thing tuned in?
image.jpg
 
Is it brand new? If so let it overflow for a day or so before trying to set it. Also if it uses a dc pump for the feed just slow down the pump
 
not brand new but new to me. Came with a non adjustable pump which looks to be the stock pump
 
You think you could have a lot of organics in your water?
 
Does that have a gate valve on the output?
 
Same issue with mine, since day 1. Going to disassemble, clean and re-assemble. I’ll let you know if I find anything.

coral vue support is useless.
 
What pump model is on it.
 
It seems to be overpowered.can you double check measurements to verify it's the 150int
 

Attachments

  • Screenshot_20220101-132354.png
    Screenshot_20220101-132354.png
    181.7 KB · Views: 201
I'd open pump and make sure nothing in the needle wheel.
And check that the air opening in the value is clean
 
You also mentioned it's new to you , can you verify previos owner or maybe yourself cleaned with vinegar?
 
I had the same problem with same pump and skimmer.
I just stopped using it because I had it on a brand new tank and assumed I didnt have enough organics in the water to pull out.
Following the thread in case anyone has a solution
 
Back
Top