Glenn E King
Non-member
After trying all the standard advice to no avail ( point a power head at the base of the anemone, rub the base with an ice cube etc. ) I discovered an easy method that has worked for me with minimal disturbance to the anemone.
If you have an anemone attached to rock in the aquarium and the rock is too big to remove from the tank or you don't want to remove the rock try this:
Take a short piece of PVC ( 3-4 ") or a PVC elbow large enough to encircle the base of the anemone. It helps to get the anemone to shrink up before you put the PVC around it. If necessary hold the PVC in place with a rock. The open end of the PVC should be pointed toward a light source as much as possible .
The anemone will move up the PVC in an attempt to get to the light. Once it detaches from the rock you can lift the PVC and move the anemone anywhere you want or out of the aquarium . Depending on the anemone they will move in a matter of hours or a day.
I considered selling patented Anemone removal devices for $39.95 + S&H but I decided to share this info for the good of mankind ( or anemone-kind )
If you have an anemone attached to rock in the aquarium and the rock is too big to remove from the tank or you don't want to remove the rock try this:
Take a short piece of PVC ( 3-4 ") or a PVC elbow large enough to encircle the base of the anemone. It helps to get the anemone to shrink up before you put the PVC around it. If necessary hold the PVC in place with a rock. The open end of the PVC should be pointed toward a light source as much as possible .
The anemone will move up the PVC in an attempt to get to the light. Once it detaches from the rock you can lift the PVC and move the anemone anywhere you want or out of the aquarium . Depending on the anemone they will move in a matter of hours or a day.
I considered selling patented Anemone removal devices for $39.95 + S&H but I decided to share this info for the good of mankind ( or anemone-kind )