Scuba_Dave
Non-member
Ok, When I redo my system I'm thinking I'm going to finally plumb my chiller in as a safety measure in case the tank climbs over 85/6
Total system volume will be around 400g
Can this be run off of a drain, or is a separate pump needed?
I'm also trying to figure how to connect this so I can vent the exhaust to the laundry room - where I can more easily vent to the outside
Titan 1500, 1/2HP
Electric Power 375 Watt
5 degree drop up to 450 gallon
Recommended water flow 200 - 500 gph
Cooling Gas R 134 A
Dimensions 15.6"L x 13.6" W x 15.6" H
Heat Exchanger: Titanium
Temperature controller: Digital accuracy 1 degree C, Set point in 1 degree steps.
Total system volume will be around 400g
Can this be run off of a drain, or is a separate pump needed?
I'm also trying to figure how to connect this so I can vent the exhaust to the laundry room - where I can more easily vent to the outside
Titan 1500, 1/2HP
Electric Power 375 Watt
5 degree drop up to 450 gallon
Recommended water flow 200 - 500 gph
Cooling Gas R 134 A
Dimensions 15.6"L x 13.6" W x 15.6" H
Heat Exchanger: Titanium
Temperature controller: Digital accuracy 1 degree C, Set point in 1 degree steps.
