Chris A. Formally toomanyfish BRS Member Oct 8, 2018 #1 I just noticed my jebao powerhead is spinning the wrong way. Is there any fix for this?
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 8, 2018 #2 Which model? Sent from my iPhone using Tapatalk
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 9, 2018 #4 How old? It can be the baring in the motor unit for the propeller loose from the socket,
OP OP Chris A. Formally toomanyfish BRS Member Oct 9, 2018 #6 I tried unplugging and replugging but nothing
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 9, 2018 #7 You need to open it up and look inside the motor where the propeller sits. There is a ceramic shoe at the bottom of the motor that held in place by a silicon ring. Make sure the ceramic shoe is not poping up. Sent from my iPhone using Tapatalk
You need to open it up and look inside the motor where the propeller sits. There is a ceramic shoe at the bottom of the motor that held in place by a silicon ring. Make sure the ceramic shoe is not poping up. Sent from my iPhone using Tapatalk
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 9, 2018 #8 If that does not solve the problem, you may have a failed controller, I have spare controller for cheap. Sent from my iPhone using Tapatalk
If that does not solve the problem, you may have a failed controller, I have spare controller for cheap. Sent from my iPhone using Tapatalk
OP OP Chris A. Formally toomanyfish BRS Member Oct 9, 2018 #9 Will do when the little one goes to sleep. I’m loosing a Millie and couldn’t figure out why, no flow from the powerhead.
Will do when the little one goes to sleep. I’m loosing a Millie and couldn’t figure out why, no flow from the powerhead.
OP OP Chris A. Formally toomanyfish BRS Member Oct 9, 2018 #10 I can hook it up to my apex to see if it’s the controller
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 9, 2018 #11 Chris A. said: I can hook it up to my apex to see if it’s the controller Click to expand... Good idea
Chris A. said: I can hook it up to my apex to see if it’s the controller Click to expand... Good idea
OP OP Chris A. Formally toomanyfish BRS Member Oct 9, 2018 #12 So I took the pump apart and didn’t see any clip or anything in it. I cleaned it and when I turned it on it was working fine again lol
So I took the pump apart and didn’t see any clip or anything in it. I cleaned it and when I turned it on it was working fine again lol
dz6t Acro Garden, BRS Sponsor BRS Sponsor BRS Member Oct 9, 2018 #13 You just re-seated the propeller by what you did.