Why do you need 2 membranes? Sediment filter and carbon block should have tds low enough for one membrane. Water pressure is probably going to have to be pretty high to send through 2 membranes with any efficiency. Maybe add a second sediment or carbon before the membrane. Again, no pro here, just questioning.
The second filter takes the waste water and just filters it again. Because the waste out of the first filter is higher tds. The good water from second filter will have slightly higher tds but mixing the two filtered streams still has low enough tds to be handled by di carts.Why do you need 2 membranes? Sediment filter and carbon block should have tds low enough for one membrane. Water pressure is probably going to have to be pretty high to send through 2 membranes with any efficiency. Maybe add a second sediment or carbon before the membrane. Again, no pro here, just questioning.
85 PSI would be the max pressure BRS recommends, and 50 is the minimum if memory serves me right. The water saver edition i think is 1>2 / 1>3 ratio. Having a septic now I barrel my rejection water, and it's almost equal.
Could you take a pic of the plumbing of your RO membranes so i can makr sure I have it right . Please and Thank you !
We use essential cookies to make this site work, and optional cookies to enhance your experience.