Cjtabares PBITAWA BRS Member Mar 29, 2012 #1 Here are a few pics of the way i will be mixing my talk. It will be controlled by my Apex. Don't have my drill so i made this hole with a dramel The maxijet cover fits well Forgot to take pics after this but this is the end result
Here are a few pics of the way i will be mixing my talk. It will be controlled by my Apex. Don't have my drill so i made this hole with a dramel The maxijet cover fits well Forgot to take pics after this but this is the end result
J JohnK Well-Known Member Staff member Moderator BRS Member Mar 29, 2012 #3 Cool. Another option for the output from the MJ is to use a 1/2" john guest fitting.
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #5 John K said: Cool. Another option for the output from the MJ is to use a 1/2" john guest fitting. Click to expand... Thanks for the complement and the tip. jayinh said: thats cool, what size container is that? Click to expand... Thanks. Its a 10 gal Brute
John K said: Cool. Another option for the output from the MJ is to use a 1/2" john guest fitting. Click to expand... Thanks for the complement and the tip. jayinh said: thats cool, what size container is that? Click to expand... Thanks. Its a 10 gal Brute
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #6 turbosnail said: Very cool! Click to expand... Thanks
NeverlosT Engineer with a reefing problem BRS Member Mar 29, 2012 #7 Is it watertight? Like ok for external use?
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #8 NeverlosT said: Is it watertight? Like ok for external use? Click to expand... Hope so. I was going to test later tonight.
NeverlosT said: Is it watertight? Like ok for external use? Click to expand... Hope so. I was going to test later tonight.
J JohnK Well-Known Member Staff member Moderator BRS Member Mar 29, 2012 #9 How did you seal the fittings to the MJ? I did a nearly identical DIY and used WO#16 which has held up for yrs.
How did you seal the fittings to the MJ? I did a nearly identical DIY and used WO#16 which has held up for yrs.
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #10 I used super glue, but i was going to look for somethink to seal it if needed. Maybe try acrylic glue. Would silicon work?
I used super glue, but i was going to look for somethink to seal it if needed. Maybe try acrylic glue. Would silicon work?
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #11 I also am unsure if I glued one of the connections so I may have to redo it anyways.
OP OP Cjtabares PBITAWA BRS Member Mar 29, 2012 #12 Well got some more work to do on this. But this is one of my favorite parts of the hobby.
M Muddskipper35 Non-member Apr 11, 2012 #13 Nice job.. Something to think about on the Mj is to thread the end of the output and tap a pvc endcap then screw the 2 together with a little pvc cement.. Harbor freight has cheap tap an die sets.. I've done this with acrylic and pvc ...
Nice job.. Something to think about on the Mj is to thread the end of the output and tap a pvc endcap then screw the 2 together with a little pvc cement.. Harbor freight has cheap tap an die sets.. I've done this with acrylic and pvc ...